Wheatley Model HP250 – 7-1/8″ Stroke Triplex Plunger Pump
No. of Plungers: 3
- Stroke Length: 71/8″
- Plunger Load: 11580 LBF
- Crank Pin: 4.50 Diameter .4.00″‘ Wide
- Crank Shaft: 4.500 Diameter 1″x 1/z KWY
- Oil Capacity: 17 U.S. Gallons
- Pump Weights by Model:
- HP250AL = 4600 LBM
- HP250AM = 4300 LBM
- HP250H = 3800 LBM
- Standard Connections For Fluid End Bodies:
- HP250AL: Cast
- 6″ ANSI 150# Suction
- 4″ ANSI 900# Discharge
- HP250AL: Billet, Forged
- 6″ ANSI 150# Suction
- 4″ ANSI 900# WN Discharge
- HP250AM: Cast
- 4″ ANSI 300# Suction
- 2 1/2 ANSI 1500# Discharge
- HP250AM: Billet, Forged
- 4″ANSI 300# Suction
- 2 1/2 ANSI 1500# WN Discharge
- HP250H: Forged
- 4 ” ANSI 300# Suction
- 2 1/2 8000# WP WN Discharge
- HP250AL: Cast
- Standard Materials For Fluid End Bodies:
- HP250AL:
- CAST Nickel-Aluminum-Bronze
- FORGED Nickel-Aluminum-Bronze
- BILLET/FORGED Carbon Steel
- HP250AM:
- CAST Nickel-Aluminum-Bronze
- FORGED Nickel-Aluminum-Bronze
- BILLET/FORGED Carbon Steel
- HP250H:
- FORGED Stainless Steel
- HP250AL: