• (918) 437-8800

Wheatley Model T365 (New Model 59T-3) Triplex Plunger Pump

 

wheatley-hp365

Pump Size:

  • maximum plunger size x stroke length, in.(mm):
    • 3.00 x 3.500 (76.2 x 88.9)
    • Rated BHP (kW) at 420 RPM: 59 (44)
    • Rated plunger load, pounds (kg): 4760 (2159)
  • Maximum discharge pressure: psi (kPa)
    • “L” model: 970 (6686)
    • “M” model: 2295 (15825)
    • “MS” model: 4789 (33017)
    • “H” model: 10000 (68948)
  • Crankshaft extension:
    • Diameter, in.(mm): 2.500 (63.5)
    • Length, in (mm): 4.13 (104.9)
    • Keyway width x depth, in.(mm): 5/8 x 5/16 (15.88 x 7.94)
  • Maximum recommended sheave diameter, in.(mm): 38 (965.2)
    • For larger sizes: Contact Factory Pinion shaft extension, if gear reducer is supplied, in.(mm)
    • For belt or chain drive: Contact Factory
    • For direct drive: Diameter: 2.000 (50.8)
  • Length: 4.250 (108.0)
  • Keyway width x depth: 1/2 x 1/4 (12.70 x 6.35)
  • Accessory gear reduction unit:
    • 3.00:1, 3.12:1, 3.23:1, 3.36:1, 3.49:1,
    • 3.62:1, 3.78:1, 3.94:1, 4.11:1, 4.29:1,
    • 4.48:1, 4.69:1, 4.93:1, 5.17:1
  • Oil Capacity, gallons (L)
  • Crankcase: 2.50 (9.46)
  • Gear Reducer – varies with ratio: 1.25 to 1.50 (4.73 to 5.68)
  • Weight, pump only on wood shipping skids, pounds (kg)
    • “L” model: 1100 (499)
    • “M” model: 980 (445)
    • “MS” model: 1080 (490)
    • “H” model: 1035 (469)
  • Standard Materials For Fluid End Bodies:
    • “L” model
      • Cast Ductile Iron
      • Forged/Plate Carbon Steel
      • Cast Nickel-Aluminum-Bronze
      • Cast Duplex Stainless Steel
    • “M” model
      • Cast Ductile Iron
      • Cast/Forged/Plate Carbon Steel
      • Cast Nickel-Aluminum-Bronze
      • Cast Duplex Stainless Steel
    • “MS” model
      • Forged Nickel-Aluminum-Bronze
      • Forged 316 Stainless Steel
      • Forged/Plate Carbon Steel
    • “H” model
      • Forged 15-5 Stainless Steel

A 59 horsepower 3 1/2” stroke horizontal triplex single acting plunger pump. Available in four different fluid end materials at pump speeds up to 420 RPM and multiple accessory gear reduction unit ratios.

Features:

  • Crankpin Bearings, Bi-Metal
  • Crankshaft, Ductile Iron
  • Crankshaft Bearings, Heavy-Duty Roller
  • Crossheads, Cast Iron with Upper/Lower Oil Grooves
  • Crosshead Pins, Alloy Steel
  • Crosshead Pin Bushings, Bronze Bearing
  • Power Frame, Cast Iron

Wheatley and GASO models have changed recently so we have provided a quick reference table for your convenience – click here